Changing your Civic LED Tail Light is not as difficult as you might think. The process involves removing the tail light assembly and cleaning it with a soft cloth. You should then replace the tail light assembly with a new one if it is in poor condition. It takes patience and a little skill. Hopefully you can now enjoy your new tail light. Here are some tips to remember:
H11/ H8/ H9 regular light bulbs work with your existing taillight socket. For the coupe, you can choose between H11/H8/H9 or 9006 LED regular light bulbs. If you are unsure of which bulb you need for your Civic, consult your manual. Make sure to replace the bulb with a similar one. You will need the same sized socket. You can also choose between a set of four bulbs, resulting in a total of 12 LED tail lights.
After removing the lens, remove the protective plastic covering to reveal the LED strip. Carefully check for any loose electrical connections. Clean the reflector of any fingerprints that may have collected, since these can ruin the quality of the reflection. Finally, insert the lens back into the casing and connect the bulb to the sockets. Before you begin driving, turn on the parking lights and the brake pedal. Your Civic LED Tail Light should now be ready for use.